Emc QLogic Instrukcja Użytkownika Strona 40
- Strona / 104
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
3
3-4
EMC Fibre Channel with QLogic HBAs in the Windows Environment
Configuring an EMC Boot Device
Boot Crashdump Save to Disk Behavior
If you system is configured to write crashdumps after system failures,
and the host is configured to boot from the array, you will be able to
successfully save the crashdump only on the original available boot
device path on which the system started. This is a Windows
limitation, and installing PowerPath will not affect this behavior. At
the time a system crash is to be written to disk, Windows has already
saved the original boot path, and PowerPath cannot redirect the
crashdump file (
MEMORY.DMP) to an alternative available device. If
you have a configuration for which you want to capture a
crashdump, you should ensure that the original primary boot path is
available at the time of the crash.
Boot-from-SAN with MSCS
The current installation, configuration and limitation information for
boot-from-SAN with Microsoft Clustering (MSCS) configurations can
be found in the latest EMC Host Connectivity Guide for Windows.
Please also refer to the EMC Support Matrix for approved
boot-from-SAN MSCS configurations.
QLogic_Windows.book Page 4 Thursday, March 10, 2005 10:31 AM
- EMC Fibre Channel with 1
- Windows Environment 1
- Contents 3
- HBA (TOE) 5
- Appendix B Troubleshooting 5
- AVANT GARDE 8
- Introduction 10
- Installing and 13
- Configuring the HBA 13
- Installing an HBA 15
- Clustering Configurations 16
- EMC HBA Settings 20
- Configuring NVRAM 21
- Manually Setting the 24
- HBA Data Rate 24
- Setting the Topology 25
- Installing the HBA Driver 26
- Windows 2003 STORPort Updates 27
- Installation 28
- Procedure for 28
- Windows 2000 and 28
- Windows 2003 Hosts 28
- Windows NT 4.0 32
- Replacing an HBA 33
- Configuring an EMC 37
- Boot Device 37
- Boot-from-SAN with MSCS 40
- Configuring the Boot BIOS 41
- , type fs1: and 45
- <handle> 47
- <control> 47
- Procedure 50
- Flowchart 50
- Requirements 52
- Preparing the Storage System 53
- Setting Up the HBA BIOS 54
- Preparing the Fabric 55
- QLogic Corporation 56
- Preparing the Server 58
- Boot BIOS 59
- Installing Windows 61
- <sp_IP> 66
- <storagegroupname> 66
- <hostname> 67
- <storagegroupname 67
- CTRL-Q BIOS 68
- Starting a Fresh Installation 70
- Replacing a Boot HBA 72
- Known Issues 74
- Configuring the 75
- QLogic QLA4010 iSCSI 75
- ENTER. This will display 89
- ENTER. Under the 89
- Third-Party Software 93
- Manager Software or Agents 94
- SANSurfer Version 95
- VERITAS Volume Manager 3.0 96
- VERITAS Foundation Suite 4.1 97
- VERITAS Foundation Suite 4.2 97
- Troubleshooting 99
- Problems and Solutions 100
- Problem 4 101
- Problem 5 101
- Problem 6 101
- Problem 7 102
- Problem 8 102
Allied Telesis SWITCH AND SWITCHBLADE XEM-2XP manuali
Manuali dei proprietari e guide per l'utente per Accessori per computer Allied Telesis SWITCH AND SWITCHBLADE XEM-2XP.
We fornisce 1 manuali pdf Allied Telesis SWITCH AND SWITCHBLADE XEM-2XP per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Komentarze do niniejszej Instrukcji