EMC QLogic Przewodnik Instalacji Pobierz pdf (Strona 44)

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Installation and Configuration

3. The appropriate NVRAM settings must now be loaded onto the

HBA(s). Type efiutil all nr=nvram23.dat (

nvram23.dat is the

default NVRAM data file for QLA23xx-based HBAs). Press Enter.

Figure 24 Data loaded onto HBA(s) installed in server

• The NVRAM data will be loaded onto the HBA(s) installed in

the server (as shown in Figure 24), and return to the EFI shell

when complete.

• If any errors are reported during this process, verify that the

correct NVRAM data file (

nvram23.dat) for your HBA has

copied to your installation media.

4. Type reset at the EFI shell prompt to reboot the server, allowing

the updated drivers, firmware, and NVRAM settings to take

effect.

5. Following the reboot, type fsN: (where N is the number which

references the proper file system, as described earlier).

6. Press Enter to access the file system containing the QLogic EFI

boot code.

• If the EFI boot code resides in a subdirectory, type cd

<subdirectory name> and press Enter.

7. Type efiutil to start the QLogic EFI Utility and press Enter.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 149 150

Brak uwag

EMC QLogic Przewodnik Instalacji Strona 44