EMC QLogic Przewodnik Instalacji

EMC CorporationCorporate Headquarters:Hopkinton, MA 01748-91031-508-435-1000www.EMC.comEMC® Host Connectivity with QLogicFibre Channel and iSCSI Host

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment10Tables

100EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions101Installing and Configuring the Linux Host with the QLogic Driver- No original module exists within this kernel-

102EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions103Installing and Configuring the Linux Host with the QLogic Driver2: qla4xxx version: v3.22Preparing... ##########

104EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions105Installing and Configuring the Linux Host with the QLogic DriverHBA/Target/Lun Number = 0/5/2Vend = DGCProdID =

106EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions107Installing and Configuring the Linux Host with the QLogic Drivermkinitrd -i initrd-2.4.21-286-smp -k vmlinuz-2.4

108EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions109Installing and Configuring the Linux Host with the QLogic Driver3. After selecting a category, find the HBA mode

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment11PrefaceAs part of an effort to improve and enhance the pe

110EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions111Installing and Configuring the Linux Host with the QLogic Driveralias scsi_hostadapter mptbasealias scsi_hostada

112EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions113Installing and Configuring the Linux Host with the QLogic DriverSaved copy of /etc/modprobe.conf as/usr/src/qlog

114EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions115Installing and Configuring the Linux Host with the QLogic DriverHBA/Target/Lun Number = 0/2/18 Vend = DGC

116EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions117Installing and Configuring the Linux Host with the QLogic Driver Vend = DGC ProdID = RAID 5 ProdRv = 021

118EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions119Installing and Configuring the Linux Host with the QLogic DriverHBA/Target/Lun Number = 0/3/27 Vend = DGC

12EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentPrefaceRelateddocumentationThe following related document

120EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions121Installing and Configuring the Linux Host with the QLogic Driver ProdRv = 0217 LunSize = 2.784 GBHBA/Target/

122EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions123Installing and Configuring the Linux Host with the QLogic Driver LunSize = 3.982 GBHBA/Target/Lun Number = 0/3

124EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions125Installing and Configuring the Linux Host with the QLogic Driver ProdRv = 0217 LunSize = 2.088 GBHBA/Target/

126EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

iSCSI out of kernel driver versions127Installing and Configuring the Linux Host with the QLogic DriverExample:cd /bootmkinitrd -i initrd-2.6.5-7.201-s

128EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogi

Updating the CEE/Menlo or iSCSI Firmware1295Invisible Body TagThis chapter provides information on updating the CEE/Menlo or iSCSI firmware for Fibre

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment13PrefaceWhere to get help EMC support, product, and licens

130EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentUpdating the CEE/Menlo or iSCSI FirmwareUpdating the QLo

Updating the QLogic firmware for iSCSI adapters131Updating the CEE/Menlo or iSCSI FirmwareUpdating the QLogic firmware for iSCSI adaptersThe adapter f

132EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentUpdating the CEE/Menlo or iSCSI Firmware

Connecting to the Storage1336Invisible Body TagThis chapter provides information on connecting to the storage.◆ Zoning and connection planning in a Fi

134EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageZoning and connection planning

Zoning and connection planning in an iSCSI environment135Connecting to the StorageZoning and connection planning in an iSCSI environmentThe user shoul

136EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageConfiguring the QLA40xx-Series

Configuring persistent binding for the Linux QLogic iSCSI HBA137Connecting to the StorageConfiguring persistent binding for the Linux QLogic iSCSI HBA

138EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageConfiguring persistent binding

Configuring persistent binding for the Linux QLogic iSCSI HBA139Connecting to the Storage 3. Unbind Target 4. Configure Target Parameters 5. Add A Tar

14EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentPrefaceYour comments Your suggestions will help us contin

140EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageUnconfiguring persistent bindin

Configuring persistent binding for the Linux QLogic iSCSI HBA141Connecting to the Storage 4. Configure Target Parameters 5. Add A Target 6. Configure

142EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageInstalling the SANSurfer iSCSI

Installing the SANSurfer iSCSI GUI143Connecting to the StorageAn Important Information screen displays. 3. Click Next.A Choose Product Features screen

144EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageThe Choose Install Folder windo

Installing the SANSurfer iSCSI GUI145Connecting to the StorageAn Installing SANSurfer window displays showing the progress of the installation.Once th

146EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageConfiguring persistent binding

Configuring persistent binding using the SANsurfer GUI147Connecting to the StorageAn IP Address screen displays.4. Fill out the IPv4 target address an

148EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageAn HBA Save Data Warnings windo

Configuring persistent binding using the SANsurfer GUI149Connecting to the StorageThe State in the Tar get Op tions tab shows that the configuration i

Introduction151Invisible Body TagThis document describes the procedures for installing an EMC-approved QLogic host bus adapter (HBA) or converged netw

150EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConnecting to the StorageOnce it is saved, the State cha

Configuring a Boot Device on an EMC Storage Array1517Invisible Body TagEMC supports booting Linux from an EMC storage array through an EMC-qualified Q

152EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayIntrodu

Cautions and restrictions for booting from EMC storage array153Configuring a Boot Device on an EMC Storage ArrayCautions and restrictions for booting

154EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array◆ CLARi

Limitations155Configuring a Boot Device on an EMC Storage ArrayLimitations This section discusses limitations, including:◆ “Common limitations” on pag

156EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array– An al

Limitations157Configuring a Boot Device on an EMC Storage Array◆ When attached to a Symmetrix, the physical-to-logical split must be such that you mee

158EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayConfigu

Configuring a Symmetrix boot device for FC or FCoE159Configuring a Boot Device on an EMC Storage Array◆ For servers with IDE CD-ROM drivers, disable t

16EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentIntroductionPurpose of this documentThis document is mean

160EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array4. From

Configuring a VNX series or CLARiiON boot device for FC or FCoE161Configuring a Boot Device on an EMC Storage ArrayConfiguring a VNX series or CLARiiO

162EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array◆ The P

Configuring a VNX series or CLARiiON boot device for FC or FCoE163Configuring a Boot Device on an EMC Storage Array3. After Fast!UTIL loads, the displ

164EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayFrom th

Installing the Linux operating systems with out of kernel drivers onto a boot device using FCoE Adapters165Configuring a Boot Device on an EMC Storage

166EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array5. Inse

Installing the Linux operating systems with out of kernel drivers onto a boot device using FCoE Adapters167Configuring a Boot Device on an EMC Storage

168EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayConfigu

Configuring a Symmetrix boot device for iSCSI 3.x169Configuring a Boot Device on an EMC Storage Array◆ Disable the BIOS on any other HBAs in the syste

Host connectivity17Introduction◆ In virtualization environments, where several physical storage and network links are commonly required.The installati

170EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array• If th

Configuring a Symmetrix boot device for iSCSI 3.x171Configuring a Boot Device on an EMC Storage Array16. Select Save Changes and press ENTER.17. Press

172EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayConfigu

Configuring a VNX series or CLARiiON boot device for iSCSI 3.x173Configuring a Boot Device on an EMC Storage Array◆ SCSI hard disks are allowed in SAN

174EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array• If th

Configuring a VNX series or CLARiiON boot device for iSCSI 3.x175Configuring a Boot Device on an EMC Storage Array12. Once the Fast!UTIL loads, select

176EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayInstall

Installing onto the boot device with the QLogic HBA v3.x-Series driver177Configuring a Boot Device on an EMC Storage ArrayInstall kernel headers and s

178EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayThe tar

Installing onto the boot device with the QLogic HBA v3.x-Series driver179Configuring a Boot Device on an EMC Storage Array[mod_devel_kit]# make IMPORT

18EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentIntroductionBoot device supportLinux hosts using QLogic a

180EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array5. Dele

Installing onto the boot device with the QLogic HBA v3.x-Series driver181Configuring a Boot Device on an EMC Storage Arraya. To speed up the build pro

182EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array6. Chan

Installing onto the boot device with the QLogic HBA v3.x-Series driver183Configuring a Boot Device on an EMC Storage ArrayUpgrading the kernel After s

184EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayConfigu

Configuring a Symmetrix boot device for iSCSI 5.x185Configuring a Boot Device on an EMC Storage Array◆ Disable the BIOS on any other HBAs in the syste

186EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array4. From

Configuring a Symmetrix boot device for iSCSI 5.x187Configuring a Boot Device on an EMC Storage Array19. Reboot the host.20. Go to “Installing onto th

188EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayConfigu

Configuring a VNX series or CLARiiON boot device for iSCSI 5.x189Configuring a Boot Device on an EMC Storage Array◆ SCSI hard disks are allowed in SAN

Zoning19IntroductionZoningThis section contains general configuration guidelines when connecting a Linux server via Fibre Channel or iSCSI to an EMC s

190EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage Array• If th

Configuring a VNX series or CLARiiON boot device for iSCSI 5.x191Configuring a Boot Device on an EMC Storage ArrayWhen the QLogic banner is displayed

192EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentConfiguring a Boot Device on an EMC Storage ArrayInstall

Additional Notes1938Invisible Body TagThis chapter provides additional notes to consider.◆ Ethernet connectivity over the CNA...

194EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesEthernet connectivity over the CNAThe QL

Device reconfiguration procedures for FC and FCoE195Additional NotesDevice reconfiguration procedures for FC and FCoEThere are three methods to reconf

196EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesDevice reconfiguration procedures for th

Device reconfiguration procedures for the iSCSI 3.x driver197Additional NotesTo stop the PowerPath service, issue one of the two following commands:/e

198EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesDevice reconfiguration procedures for th

Device reconfiguration procedures for the iSCSI 5.x driver199Additional Notesorservice naviagentcli stop◆ If PowerPath is installed and enabled on the

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment2Copyright © 2001–2011 EMC Corporation. All rights reserved

20EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentIntroductionFigure 1 provides a zoning example.Figure 1 Z

200EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesThe unloading of the module can be accom

Adapter information for RHEL5, SLES10, and SLES 11201Additional NotesAdapter information for RHEL5, SLES10, and SLES 11QLogic fully supports upstream

202EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesSNIA API for third-party software (EMC I

OS upgrade from supporting out of kernel driver to OS version supporting in kernel driver203Additional NotesOS upgrade from supporting out of kernel d

204EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional Notes◆ If PowerPath is installed and enabled

OS upgrade from supporting out of kernel driver to OS version supporting in kernel driver205Additional Notesrunning kernel if they are not in use and

206EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional NotesDevice reconfiguration: Device numbering

HPQ server-specific note207Additional NotesHPQ server-specific noteWhen using HPQ systems, it is highly recommended that the HPQ SmartStart CD be run

208EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentAdditional Notes(VNX series or CLARiiON Only) disconnect

Setting Up External Boot for IBM Blade Server HS40 (8839)209AInvisible Body TagThis appendix contains information on setting up external boot for IBM

Installation Steps212Invisible Body TagThis chapter outlines the prerequisisites for first-time installation, offers a summary of the installation ste

210EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentSetting Up External Boot for IBM Blade Server HS40 (8839

Special Instructions211BInvisible Body TagThis appendix contains special instructions for the following: ◆ CLARiiON CX200 direct-connect dual-host Ora

212EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentSpecial InstructionsCLARiiON CX200 direct-connect dual-h

Setting the FC-AL loop ID for CLARiiON CX200 direct-connect Oracle9iRAC and RHEL 2.1 Cluster Managerconfigurations with QLogic QLA234x-Series adapters

214EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentSpecial Instructions

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment215BBIOSSettings 32Version 32boot configuration 141boot

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment216IndexSSANsurfer 32, 126, 131SANsurferCLI 32, 126, 128,

22EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsPrerequisites for first-time installati

Prerequisites for first-time installation23Installation StepsFollow the Downloads > EMC links to your adapter for the appropriate version.Linux dri

24EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsSummary of installation stepsTable 1des

Summary of installation steps25Installation Steps4 Install the driver. There are two states:• In kernel For drivers listed in the EMC Support Matrix a

26EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstallation Steps5 Install the firmware.There are two st

Installing the adapter27Installation StepsInstalling the adapterFollow the instructions included with your adapter. The adapter installs into a single

28EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstallation Steps• Fibre Channel over Ethernet converged

Installing the adapter29Installation StepsServers have several different bus slot types for accepting adapters: ◆ PCI◆ PCI-X◆ PCI-X 2.0◆ PCI-ExpressPC

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment3Preface...

30EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsFigure 3 shows the adapter edge connect

Installing the adapter31Installation Stepsthroughput. Because of how PCI Express slots are keyed, an x1 adapter can be inserted in all four slot types

32EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstallation StepsQLogic offers adapters for each bus/slo

Installing the adapter33Installation Stepsmost up-to-date information on which servers support these adapters.

34EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstallation Steps

Installing and Configuring the BIOS Settings353Invisible Body Tag This chapter describes the procedures for installing and configuring the BIOS settin

36EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS SettingsVerifying and

Verifying and configuring the BIOS settings37Installing and Configuring the BIOS Settingsd. Under Adapter Settings, note the BIOS version:– If the ban

38EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS SettingsBe sure to ch

Verifying and configuring the BIOS settings39Installing and Configuring the BIOS SettingsMethod 3: Upgrading the adapter BIOS using QLogic SANsurfer C

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment4ContentsManually setting the topology for QLogic Fibre Cha

40EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS Settingsheading are t

Verifying and configuring the BIOS settings41Installing and Configuring the BIOS Settings* The WWNN of the server's boot LUN must be listed in th

42EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS SettingsNote: For Lin

Manually setting the topology for QLogic Fibre Channel adapters43Installing and Configuring the BIOS SettingsManually setting the topology for QLogic

44EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the BIOS SettingsManually sett

Installing and Configuring the Linux Host with the QLogic Driver454Invisible Body Tag This chapter describes the procedures for installing and configu

46EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

QLogic SANsurfer and SANsurfer CLI47Installing and Configuring the Linux Host with the QLogic DriverQLogic SANsurfer and SANsurfer CLI QLogic's S

48EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE in kernel driver versions49Installing and Configuring the Linux Host with the QLogic DriverFibre Channel and FCoE in kernel dri

5EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentContentsChapter 6 Connecting to the StorageZoning and conn

50EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE in kernel driver versions51Installing and Configuring the Linux Host with the QLogic DriverSLES 10 SP1 8.01.07-k3√√RHEL 5.1Asia

52EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE in kernel driver versions53Installing and Configuring the Linux Host with the QLogic DriverInstallation instructions for the in

54EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE in kernel driver versions55Installing and Configuring the Linux Host with the QLogic Driverwhere $1 is the v2.4.x kernel versio

56EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE in kernel driver versions57Installing and Configuring the Linux Host with the QLogic Driverwhere $1 is the v2.6.x kernel versio

58EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions59Installing and Configuring the Linux Host with the QLogic DriverFibre Channel and FCoE out of ke

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment6ContentsSLES 11 OS SAN-boot installation with QLogic FCoE

60EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions61Installing and Configuring the Linux Host with the QLogic DriverRefer to the latest EMC Support

62EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions63Installing and Configuring the Linux Host with the QLogic Driver◆ To create a modular v7.xx.xx/v

64EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions65Installing and Configuring the Linux Host with the QLogic DriverMethod 2: Installing the QLogic

66EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions67Installing and Configuring the Linux Host with the QLogic DriverRHEL examples An example of the

68EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions69Installing and Configuring the Linux Host with the QLogic DriverProduct Type : Dis

7EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentContentsUnloading and reloading the modular QLogic driver.

70EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions71Installing and Configuring the Linux Host with the QLogic DriverSaved copy of /etc/sysconfig/ker

72EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions73Installing and Configuring the Linux Host with the QLogic DriverStatus : Onl

74EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions75Installing and Configuring the Linux Host with the QLogic DriverMethod 3: Installing the QLogic

76EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions77Installing and Configuring the Linux Host with the QLogic Driver◆ “Method 2: Uninstalling the QL

78EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions79Installing and Configuring the Linux Host with the QLogic Driver4. Reboot the host.QLogic v7.x a

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment8Contents

80EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions81Installing and Configuring the Linux Host with the QLogic DriverDescription of QLogic v7.x-serie

82EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions83Installing and Configuring the Linux Host with the QLogic Driver◆ MaxRetriesPerIo: defines the t

84EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions85Installing and Configuring the Linux Host with the QLogic DriverNote: When attaching to VNX seri

86EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

Fibre Channel and FCoE out of kernel driver versions87Installing and Configuring the Linux Host with the QLogic DriverAn example of the console output

88EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

iSCSI in kernel driver versions89Installing and Configuring the Linux Host with the QLogic DriveriSCSI in kernel driver versionsThe following installa

EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment9Title

90EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

iSCSI in kernel driver versions91Installing and Configuring the Linux Host with the QLogic DriverInstallation instructions for the in kernel QLogic dr

92EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

iSCSI in kernel driver versions93Installing and Configuring the Linux Host with the QLogic Driverwhere N is the sequential value of QLogic adapter ins

94EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

iSCSI out of kernel driver versions95Installing and Configuring the Linux Host with the QLogic DriveriSCSI out of kernel driver versionsThe following

96EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

iSCSI out of kernel driver versions97Installing and Configuring the Linux Host with the QLogic DriverThis section provides the following instructions

98EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux EnvironmentInstalling and Configuring the Linux Host with the QLogic

iSCSI out of kernel driver versions99Installing and Configuring the Linux Host with the QLogic DriverThis method requires no manual edits for systems